demobook

Fl Studio: Equalizing sounds with Fruity Parametric EQ 2

Fl StudioTry it →Watch full video →Jay Cactus TVJay Cactus TV·

Demo summary

A demonstration of using an EQ to visualize frequencies and apply high-pass filters to remove muddy low-end from melodic instruments.

Step-by-step

  1. Open Fruity Parametric EQ 2 on your instrument track
  2. Right-click the solo button to isolate the instrument and visualize its frequency range
  3. Select a frequency point and drag it down to reduce the volume of that specific range
  4. Change the steepness of the curve by adjusting the filter order (e.g., Steep 8)
  5. Move the EQ plugin before other effects like delay in the signal chain if necessary

Options

  • Change the steepness of the filter curve
  • Adjust the order of effects in the mixer chain

Watch out for

  • Too many instruments covering the same base frequencies will cause clashing or a muddy sound

Tips

  • Give each instrument its own space in the frequency spectrum to prevent sounds from fighting for space
  • Use a high-pass filter on melodic instruments like pianos or choirs if you plan to add a sub-bass or 808 later

All demos from “FL Studio Complete Beginner Basics Tutorial (2025)”

  1. 10:131:00Chord inversions and bass notesDemonstration of manipulating MIDI notes using shortcuts to create chord inversions and adding root notes for a thicker bass foundation.Fl StudioAI Melody & MIDI Generator
  2. 12:060:26Using the Arpeggiator toolThe instructor shows how to use the Alt+A shortcut to open the Arpeggiator and break up chords into rhythmic melodic patterns.Fl StudioAI Melody & MIDI Generator
  3. 14:191:05Humanizing MIDI with Randomizer and StrumThe video demonstrates using Alt+R (Randomizer) to vary note velocity and Alt+S (Strum) to offset note start times for a more natural piano feel.Fl StudioAI Melody & MIDI Generator
  4. 16:011:46Layering melodies with Ghost ChannelsThe instructor uses the Flex plugin to add a violin counter-melody, utilizing 'Ghost Channels' to see the original piano notes for reference.Fl StudioAI Melody & MIDI Generator
  5. 20:301:35Adding Reverb and Delay effectsThe instructor adds Fruity Reverb 2 and Fruity Delay to a piano track, explaining wet/dry levels and effect chain order.Fl StudioAI Audio Editor
  6. 22:051:30Equalizing sounds with Fruity Parametric EQ 2CurrentA demonstration of using an EQ to visualize frequencies and apply high-pass filters to remove muddy low-end from melodic instruments.Fl StudioAI Audio Editor
  7. 23:361:57Rendering MIDI to Audio and ResamplingThe instructor renders a MIDI pattern into a WAV file (Alt+R) and then manipulates the audio by pitching it down and reversing it.Fl StudioAI Audio Editor
  8. 30:242:30Programming 808s and adjusting envelopesThe instructor demonstrates setting up an 808 with 'Cut Itself' enabled and adjusting the ADSR envelope so the note stops exactly when the MIDI note ends.Fl StudioAI Beat Generator
  9. 32:541:00Layering kicks with 808sA demonstration of copying an 808 pattern to a kick drum and using Alt+K to flatten the notes to a single pitch (C5).Fl StudioAI Beat Generator
  10. 33:580:52Applying Fruity Soft ClipperThe instructor adds Fruity Soft Clipper to the Master track to prevent digital clipping while maintaining punchy drum levels.Fl StudioAI Mastering
  11. 41:450:31Creating a volume fade-out automationA demonstration of using Fruity Balance to create an automation clip that fades out the master volume at the end of the track.Fl StudioAI Audio Editor
  12. Watch “FL Studio Complete Beginner Basics Tutorial (2025)” →

AI Audio Editor

  1. 3:090:11Adjust hi-hat length with the Out knobThe demonstration shows how to use the 'out' knob in the FL Studio sampler to shorten a hi-hat sample for a tighter sound.Dirkey
  2. 9:270:33EQing melody for 808 roomThe demonstration shows opening an EQ on the melody track and applying a low cut under 100Hz to prevent frequency clashing with the 808.Dirkey
  3. 10:092:17Leveling drum tracks in the mixerThe creator walks through the mixer, adjusting faders for the snare, hi-hats, and percussion to achieve a balanced drum mix.Dirkey
  4. 2:000:42Time stretching samples in FL StudioThe creator demonstrates how to use the stretch mode in FL Studio to adjust the BPM of an AI-generated sample to fit a 91-93 BPM West Coast pocket.Busy Works Beats
  5. 22:500:47Automating high-pass and low-pass filtersThe creator demonstrates setting up a band-pass filter and right-clicking to create automation nodes to clear room for an 808 bass line.Busy Works Beats
  6. 27:560:39Slicing audio with Fruity SlicerThe creator demonstrates opening a sample in Fruity Slicer and slicing it by the beat to create a quantized stutter effect.Busy Works Beats
  7. 0:090:37Create a volume automation clip in FL StudioThe narrator demonstrates selecting a region in the playlist, right-clicking a volume knob in the channel rack, and creating an automation clip to perform a fade-in.FL Studio
  8. 1:590:28Editing automation control pointsA walkthrough of UI actions in FL Studio including right-clicking to add/delete points, using shift-click to lock levels, and changing curve types.FL Studio
  9. 3:200:14Copy and paste automation statesThe user demonstrates copying a curve from one automation clip to another using the Articulator Tools menu.FL Studio
  10. 7:020:32Processing AI vocals in FL StudioThe user demonstrates applying a gate, Soundgoodizer, EQ, reverb, and delay to the AI-generated vocal within FL Studio to finalize the track.Arcade
  11. 2:030:24EQing a kick drum in FL StudioThe user demonstrates searching for and cutting resonating frequencies on a kick drum sample using an EQ plugin.Basslila
  12. 11:390:47Sidechain compression with Fruity LimiterA step-by-step walkthrough of sidechaining a bass to a kick using Fruity Limiter, including setting the sidechain input, ratio, and threshold.Basslila
demobook

Show, don’t tell.

Categories

LaunchesEmail MarketingImage Generation & EditingMusic & AudioSales TechVideo & Animation

Trends

AI Fruit Video

About

SubmitAboutPrivacyTermsContact

© demobook.co