demobook

Fl Studio: EQing melody for 808 room

Fl StudioTry it →Watch full video →Dirkey ·

Demo summary

The demonstration shows opening an EQ on the melody track and applying a low cut under 100Hz to prevent frequency clashing with the 808.

Step-by-step

  1. Open an EQ on the melody mixer track
  2. Apply a low cut to remove all frequencies under 100Hz
  3. Right-click the EQ and select Create automation clip
  4. Automate the EQ to enable only when the 808 is playing

Options

  • Enable or disable the EQ manually via automation based on the presence of the 808

Watch out for

  • Do not leave the low cut enabled when the 808 is absent, as it removes the life and lower frequencies from the sample

Tips

  • Leave the lower frequencies of the melody intact during the intro
  • Only remove the lower frequencies of the melody during sections where the 808 is present to prevent clashing

All demos from “The ULTIMATE DRUM PATTERN & MIXING Tutorial | FL Studio”

  1. 3:090:11Adjust hi-hat length with the Out knobThe demonstration shows how to use the 'out' knob in the FL Studio sampler to shorten a hi-hat sample for a tighter sound.Fl StudioAI Audio Editor
  2. 4:050:34Programming hi-hat rollsThe video demonstrates switching between 1/3 and 1/6 step grid sizes in the piano roll to draw in hi-hat rolls.Fl StudioAI Beat Generator
  3. 7:541:16Programming 808 patterns and glidesThe creator demonstrates finding the root note for an 808, drawing a pattern in the piano roll, and adding a glide note using the slide icon.Fl StudioAI Beat Generator
  4. 9:270:33EQing melody for 808 roomCurrentThe demonstration shows opening an EQ on the melody track and applying a low cut under 100Hz to prevent frequency clashing with the 808.Fl StudioAI Audio Editor
  5. 10:092:17Leveling drum tracks in the mixerThe creator walks through the mixer, adjusting faders for the snare, hi-hats, and percussion to achieve a balanced drum mix.Fl StudioAI Audio Editor
  6. 12:350:53Hard-clipping the master trackThe creator demonstrates using the BNO Clip plugin on the master track to squash peaks and increase the perceived loudness of the 808.Fl StudioAI Mastering
  7. Watch “The ULTIMATE DRUM PATTERN & MIXING Tutorial | FL Studio” →

AI Audio Editor

  1. 1:53:5128:42Mixing with EQ and the FL Studio MixerA detailed walkthrough of routing instruments to the mixer and using Fruity Parametric EQ 2 to clean up frequencies and sculpt sounds.Mix Elite | FL Studio Tips
  2. 2:42:1011:30Sidechain Compression SetupThe instructor demonstrates setting up sidechain compression between the kick and the bass using Fruity Limiter's sidechain input.Mix Elite | FL Studio Tips
  3. 2:53:4010:19Adding Space with Reverb and DelayA demo of applying Fruity Reeverb 2 and Fruity Delay 3 to instruments to create depth and stereo width.Mix Elite | FL Studio Tips
  4. 3:03:595:26Creating Automation ClipsThe instructor demonstrates how to automate an EQ high-cut filter and reverb wetness over time in the Playlist.Mix Elite | FL Studio Tips
  5. 3:13:414:23Audio Recording and Editing in FL StudioA walkthrough of configuring ASIO drivers, arming tracks for recording, and using the slice tool to edit recorded audio clips.Mix Elite | FL Studio Tips
  6. 3:22:563:07Vocal Volume Automation in EdisonDemonstrating how to use the Edison audio editor to manually automate volume envelopes for a more consistent vocal performance.Mix Elite | FL Studio Tips
  7. 3:39:3612:20Vocal Mixing Chain: De-essing and Parallel ReverbA demo of using Maximus for de-essing and setting up a sidechained reverb bus to keep vocals clear while adding space.Mix Elite | FL Studio Tips
  8. 20:301:35Adding Reverb and Delay effectsThe instructor adds Fruity Reverb 2 and Fruity Delay to a piano track, explaining wet/dry levels and effect chain order.Jay Cactus TV
  9. 22:051:30Equalizing sounds with Fruity Parametric EQ 2A demonstration of using an EQ to visualize frequencies and apply high-pass filters to remove muddy low-end from melodic instruments.Jay Cactus TV
  10. 23:361:57Rendering MIDI to Audio and ResamplingThe instructor renders a MIDI pattern into a WAV file (Alt+R) and then manipulates the audio by pitching it down and reversing it.Jay Cactus TV
  11. 41:450:31Creating a volume fade-out automationA demonstration of using Fruity Balance to create an automation clip that fades out the master volume at the end of the track.Jay Cactus TV
  12. 6:530:28Fixing bass and chord frequency conflictsThe user demonstrates shifting a bassline down one octave to separate it from the chord frequencies, instantly improving clarity in the mix.Memphy
demobook

Show, don’t tell.

Categories

Video & AnimationImage Generation & EditingMusic & AudioSales TechEmail Marketing

About

SubmitAboutPrivacyTermsContact

© demobook.co