demobook

Izotope Rx: Batch breath removal with Breath Control

IIzotope RxTry it →Watch full video →Mastering․com ·

Demo summary

The narrator applies the Breath Control module to an entire vocal track, adjusting sensitivity to reduce breaths while maintaining a natural sound.

Step-by-step

  1. Select the entire vocal track using Command+A
  2. Open the Breath Control module
  3. Set the Sensitivity to approximately 6
  4. Adjust the Gain slider to determine the level of attenuation
  5. Click Compare to preview the processed audio against the original
  6. Click Render to apply the changes to the file

Options

  • Process individual breaths manually by highlighting specific selections
  • Toggle between 'Real Time' and rendered processing
  • Adjust Gain to -50 dB for a more natural reduction rather than total removal

Tips

  • Back off the settings slightly to keep some breath for a more natural sound
  • Use the 'ghost' view in the compare window to see exactly which breaths are being removed
  • Avoid aggressive settings that completely erase breaths, as it can sound unnatural

Highlights

“it's really good at removing the breaths”

All demos from “How to Use iZotope RX12 (Musicians Guide)”

  1. 4:250:49Identifying drum transients in the RX 12 SpectrogramThe narrator zooms into a drum recording to show how vertical lines in the spectrogram represent full-frequency transients like kick drum hits.IIzotope RxAI Audio Editor
  2. 6:581:21Analyzing broadband noise and reverbThe narrator demonstrates how ambient reverb and room noise appear as 'cloudy dense fog' between vocal phrases in the RX 12 interface.IIzotope RxAI Audio Enhancer & Noise Reduction
  3. 8:241:09Locating plosives in vocal recordingsThe demonstrator identifies low-frequency 'hot spots' in the spectrogram to pinpoint and play back distracting 'P' and 'B' plosive sounds.IIzotope RxAI Audio Enhancer & Noise Reduction
  4. 10:241:18Importing files and toggling view modesA demonstration of dragging a vocal file into RX 12 and using the slider to transition between waveform and spectrogram displays.IIzotope RxAI Audio Editor
  5. 13:211:43Removing plosives with the De-plosive moduleThe narrator uses the frequency-time selection tool to isolate a plosive and renders the De-plosive module to clean the audio.IIzotope RxAI Audio Enhancer & Noise Reduction
  6. 15:231:27Comparing multiple processing settingsThe demonstrator shows how to use the 'Compare' history to toggle between original audio and two different De-plosive settings before rendering.IIzotope RxAI Audio Enhancer & Noise Reduction
  7. 21:083:20Using advanced selection and harmonic toolsA walkthrough of the Lasso, Paintbrush, and Magic Wand tools to select specific frequencies and their associated harmonics for processing.IIzotope RxAI Audio Editor
  8. 26:550:58Instant Process mode for rapid editingThe narrator demonstrates the 'Instant Process' feature to automatically apply De-click and Attenuate functions simply by highlighting audio areas.IIzotope RxAI Audio Enhancer & Noise Reduction
  9. 35:582:37Real-time spectral editing in a DAW via ARAThe demonstrator uses the RX 12 Spectral Editor plugin inside Studio One to perform non-destructive plosive removal and S-attenuation directly on the timeline.IIzotope RxAI Audio Enhancer & Noise Reduction
  10. 41:011:36Splitting a mix into stems with Music RebalanceThe narrator uses the new Stem Split feature to separate a full track into voice, bass, drums, and other stems for individual processing.IIzotope RxAI Vocal Remover & Stem Splitter
  11. 44:541:57Removing cymbal bleed from a snare trackA demonstration of the rebuilt De-bleed module using machine learning to isolate a snare drum from heavy cymbal bleed without a sidechain reference.IIzotope RxAI Audio Enhancer & Noise Reduction
  12. 47:240:56Truncating audio with Trim SilenceThe demonstrator uses the Trim Silence module to automatically remove gaps between sound design recordings and tighten the sequence.IIzotope RxAI Audio Editor
  13. 55:372:38Batch breath removal with Breath ControlCurrentThe narrator applies the Breath Control module to an entire vocal track, adjusting sensitivity to reduce breaths while maintaining a natural sound.IIzotope RxAI Audio Enhancer & Noise Reduction
  14. 1:03:081:48Repairing clipped audio with De-clipThe demonstrator uses the De-clip module to reconstruct transients and remove digital distortion from an over-gained vocal recording.IIzotope RxAI Audio Enhancer & Noise Reduction
  15. 1:07:401:24Eliminating guitar amp humThe narrator uses the 'Learn' function in the De-hum module to identify and completely remove a consistent buzzing sound from a guitar track.IIzotope RxAI Audio Enhancer & Noise Reduction
  16. 1:12:302:05Optimizing master loudness for streamingThe demonstrator uses the Loudness Optimize module to boost the level of quiet sections in a master without affecting the loudest peaks.IIzotope RxAI Mastering
  17. 1:14:481:24Previewing audio on streaming codecsThe narrator uses the Streaming Preview module to hear how a track will sound when compressed by Spotify, Apple Music, or YouTube codecs.IIzotope RxAI Mastering
  18. Watch “How to Use iZotope RX12 (Musicians Guide)” →

AI Audio Enhancer & Noise Reduction

  1. 7:131:05Remove snare bleed using the De-bleed moduleThe user demonstrates the De-bleed module on a drum track, selecting the 'snare' profile and adjusting the percentage to reduce unwanted bleed from other instruments.White Sea Studio
  2. 3:200:30Fix audio clipping with iZotope RX 11 De-clipThe creator intentionally records a distorted, clipping audio signal and demonstrates how the RX 11 De-clip tool restores the audio quality.Danny Lightning Audio and Reviews
  3. 4:101:07Remove background noise and mouth clicks in RX 11The narrator demonstrates the Repair Assistant's ability to filter out a loud window air conditioner and fan noise while isolating the voice.Danny Lightning Audio and Reviews
  4. 5:170:46De-essing vocals with iZotope RX 11The user accentuates 's' sounds in a recording to demonstrate the effectiveness of the RX 11 De-esser in real-time.Danny Lightning Audio and Reviews
  5. 6:210:53Remove room reverb with iZotope RX 11 De-reverbThe creator records in a non-treated room and adjusts the De-reverb dial to show how much room echo the tool can remove.Danny Lightning Audio and Reviews
  6. 6:581:21Analyzing broadband noise and reverbThe narrator demonstrates how ambient reverb and room noise appear as 'cloudy dense fog' between vocal phrases in the RX 12 interface.Mastering․com
  7. 8:241:09Locating plosives in vocal recordingsThe demonstrator identifies low-frequency 'hot spots' in the spectrogram to pinpoint and play back distracting 'P' and 'B' plosive sounds.Mastering․com
  8. 13:211:43Removing plosives with the De-plosive moduleThe narrator uses the frequency-time selection tool to isolate a plosive and renders the De-plosive module to clean the audio.Mastering․com
  9. 15:231:27Comparing multiple processing settingsThe demonstrator shows how to use the 'Compare' history to toggle between original audio and two different De-plosive settings before rendering.Mastering․com
  10. 26:550:58Instant Process mode for rapid editingThe narrator demonstrates the 'Instant Process' feature to automatically apply De-click and Attenuate functions simply by highlighting audio areas.Mastering․com
  11. 35:582:37Real-time spectral editing in a DAW via ARAThe demonstrator uses the RX 12 Spectral Editor plugin inside Studio One to perform non-destructive plosive removal and S-attenuation directly on the timeline.Mastering․com
  12. 44:541:57Removing cymbal bleed from a snare trackA demonstration of the rebuilt De-bleed module using machine learning to isolate a snare drum from heavy cymbal bleed without a sidechain reference.Mastering․com
demobook

Show, don’t tell.

Categories

Video & AnimationImage Generation & EditingSales TechEmail MarketingMusic & Audio

About

SubmitAboutPrivacyTermsContact

© demobook.co