Bandlab: Configure Filter Echo Plus delay

Bandlab Try it →Watch full video →Sky Jordxn · Feb 2026

Demo summary

The creator walks through adjusting the mix, feedback, and timing settings on the Filter Echo Plus delay to prevent a cluttered sound.

Step-by-step

Select Filter Echo Plus from the delay options
Lower the Mix setting to reduce clutter
Turn down the Feedback
Adjust the Timing to half notes
Adjust the Cutoff frequency
Fine-tune the Mix level while listening to the playback

Options

Choose between D Delay Plus, Filter Echo Plus, or Ping Pong Delay

Tips

Avoid the 'set it and forget it' approach with default delay settings to prevent a cluttered mix
Use the Mix setting as your primary tool for balancing the effect
Set timing to half notes for a cleaner rhythmic feel
Run the cutoff slightly to shape the tone of the echo

Highlights

“that's cluttering. That's not what we need. That's not a good move.”

All demos from “This Makes Your VOCALS Sound CLEANER in BANDLAB (copy me)”

1:331:07EQ vocals in BandLabThe creator demonstrates using the Graphic EQ in BandLab to roll off low-end frequencies and make subtle boosts to thin out a muddy vocal track.Bandlab· AI Audio Editor
2:480:53Apply compression with BA28The creator shows how to use the BA28 compressor in BandLab, adjusting the gain and squeeze settings to enhance the vocal presence after EQ.Bandlab· AI Audio Editor
5:010:26Add depth with UniVerbThe creator demonstrates adding the UniVerb plugin to the vocal chain to provide depth without overpowering the lead vocal.Bandlab· AI Audio Editor
5:501:06Configure Filter Echo Plus delayCurrentThe creator walks through adjusting the mix, feedback, and timing settings on the Filter Echo Plus delay to prevent a cluttered sound.Bandlab· AI Audio Editor
7:330:26Create a telephone effect for ad-libsThe creator demonstrates using EQ on a separate track to create a telephone-style effect for vocal ad-libs in BandLab.Bandlab· AI Audio Editor
Watch “This Makes Your VOCALS Sound CLEANER in BANDLAB (copy me)” →

AI Audio Editor

0:090:15Fade out songs in BandLabThe creator demonstrates how to use the slider tool in BandLab to create a professional fade-out for tracks that are too long.BkOnWhatt
3:082:12Recording and managing vocal tracks in BandLabThe user demonstrates recording multiple vocal takes, managing track limits by deleting unused tracks, and adjusting volume levels within the DAW.busic
0:280:16Setting up a project in BandLabThe creator demonstrates importing a beat into BandLab, using a song keyfinder to set the autotune, and enabling the metronome to maintain timing.BkOnWhatt
4:182:14Punching in vocals and layering in BandLabMdot 59 demonstrates the 'punch in' technique in BandLab, recording short vocal segments and immediately playing them back to ensure they sit correctly in the mix.More Mdot 59
19:141:18Refining vocal delivery and timingThe creator walks through re-recording specific lines to improve the flow and timing of the drill track within the BandLab interface.More Mdot 59
0:150:55Setting up the project and Auto-Pitch in BandLabThe creator demonstrates the initial setup in BandLab, including importing a beat, adjusting its volume, and configuring the Auto-Pitch key and scale settings.Sky Jordxn
1:100:36Applying Gain plugin to vocalsThe creator adds a gain plugin to the vocal chain in BandLab to act as a preamp, demonstrating how it increases the vocal signal level.Sky Jordxn
1:462:38Vocal EQ and frequency sculptingThe creator demonstrates how to use the EQ plugin in BandLab to roll off low-end frequencies around 107-120Hz and adjust high-end brightness while listening to the track.Sky Jordxn
4:241:21Configuring 76 and 2A CompressorsThe creator walks through setting up a serial compression chain using the 76 compressor (4:1 ratio, fast release) followed by a 2A compressor to smooth out the vocal dynamics.Sky Jordxn
2:270:21Adjusting Tape Sim saturation in BandLabThe creator demonstrates the Tape Sim effect in BandLab, slowly turning up the drive to show how it adds saturation and width to the vocals.BkOnWhatt
4:361:04Mixing vocals with BandLab Graphic EQThe creator walks through the Graphic EQ in BandLab, adjusting specific frequency bands (100Hz, 800Hz, and 6.4kHz) to demonstrate how they affect bass, presence, and sparkle.BkOnWhatt
1:510:09Set project BPM and Key in BandLabThe creator demonstrates how to access the settings icon to verify and set the song's tempo and key to ensure effects like AutoPitch function correctly.BandLab